Citrix certification 1Y0-350 exam training methods

If you buy ITCertMaster Citrix 1Y0-350 exam training materials, you will solve the problem of your test preparation. You will get the training materials which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success.

The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use ITCertMaster's Citrix 1Y0-350 exam training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.

Would you like to improve your IT skills through learning the Citrix 1Y0-350 exam related knowledge to won other people's approval? Citrix certification exam can help you perfect yourself. If you successfully get Citrix 1Y0-350 certificate, you can finish your work better. Although the test is so difficult, with the help of ITCertMaster exam dumps you don't need so hard to prepare for the exam. After you use ITCertMaster Citrix 1Y0-350 study guide, you not only can pass the exam at the first attempt, also can master the skills the exam demands.

ITCertMaster's Citrix 1Y0-350 exam training material is the best training materials on the Internet. It is the leader in all training materials. It not only can help you to pass the exam , you can also improve your knowledge and skills. Help you in your career in your advantage successfully. As long as you have the Citrix 1Y0-350 certification, you will be treated equally by all countries.

Exam Code: 1Y0-350
Exam Name: Citrix (Citrix NetScaler 10 Essentials and Networking)
Guaranteed success with practice guides, No help, Full refund!
126 Questions and Answers
Updated: 2014-03-26

Related study materials proved that to pass the Citrix 1Y0-350 exam certification is very difficult. But do not be afraid, ITCertMaster have many IT experts who have plentiful experience. After years of hard work they have created the most advanced Citrix 1Y0-350 exam training materials. ITCertMaster have the best resource provided for you to pass the exam. Does not require much effort, you can get a high score. Choose the ITCertMaster's Citrix 1Y0-350 exam training materials for your exam is very helpful.

1Y0-350 Free Demo Download: http://www.itcertmaster.com/1Y0-350.html

NO.1 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-350 exam   1Y0-350   1Y0-350   1Y0-350 practice test

NO.2 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix test   1Y0-350 test answers   1Y0-350

NO.3 Scenario: An engineer executes the following commands:
add vlan 2 bind vlan 2 -ifnum 1 / 2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress
10.110.4.200 255.255.255.0
What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix   1Y0-350   1Y0-350   1Y0-350 exam dumps

NO.4 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix pdf   1Y0-350   1Y0-350   1Y0-350

NO.5 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A

Citrix   1Y0-350   1Y0-350 exam simulations   1Y0-350 test answers   1Y0-350   1Y0-350 exam

NO.6 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B

Citrix   1Y0-350   1Y0-350 exam

NO.7 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix test questions   1Y0-350 questions   1Y0-350   1Y0-350   1Y0-350

NO.8 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B

Citrix   1Y0-350   1Y0-350 study guide   1Y0-350 answers real questions   1Y0-350 exam dumps

NO.9 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix   1Y0-350 practice test   1Y0-350 test answers

NO.10 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A

Citrix exam simulations   1Y0-350 exam prep   1Y0-350

ITCertMaster offer the latest C-TSCM62-65 Practice Test and high-quality VCAC510 PDF Exam Questions training material. Our HP5-T01D VCE testing engine and LOT-404 dumps can help you pass the real exam. High-quality NS0-156 Exam Questions & Answers can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertmaster.com/1Y0-350.html