We should use the most relaxed attitude to face all difficulties. Although Novell 050-701 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because ITCertMaster's Novell 050-701 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. ITCertMaster's Novell 050-701 exam training materials is the best medicine for candidates.
To pass Novell 050-701 certification exam seems to be a very difficult task. Having registered 050-701 test, are you worrying about how to prepare for the exam? If so, please see the following content, I now tell you a shortcut through the 050-701 exam. The certification training dumps that can let you pass the test first time have appeared and it is ITCertMaster Novell 050-701 exam dumps. If you would like to sail through the test, come on and try it.
ITCertMaster is a website to meet the needs of many customers. Some people who used our simulation test software to pass the IT certification exam to become a ITCertMaster repeat customers. ITCertMaster can provide the leading Novell training techniques to help you pass Novell certification 050-701 exam.
Are you worried about how to passs the terrible Novell 050-701 exam? Do not worry, With ITCertMaster's Novell 050-701 exam training materials in hand, any IT certification exam will become very easy. ITCertMaster's Novell 050-701 exam training materials is a pioneer in the Novell 050-701 exam certification preparation.
The IT expert team use their knowledge and experience to make out the latest short-term effective training materials. This training materials is helpful to the candidates. It allows you to achieve the desired results in the short term. Especially those who study while working, you can save a lot of time easily. ITCertMaster's training materials are the thing which you most wanted.
Exam Code: 050-701
Exam Name: Novell (Upgrading t Novell Open Enterprise Server for NetWare)
Guaranteed success with practice guides, No help, Full refund!
167 Questions and Answers
Updated: 2014-01-21
050-701 Free Demo Download: http://www.itcertmaster.com/050-701.html
NO.1 Click the Point and Click button to begin.
Click the iManager task used to move and split NSS volumes.
Answer: Select ° Vo l u m e
NO.2 Which are prerequisite requirements for using Deployment Manager? (Choose 2.)
A.NetWare 6.5 or later installed on the server.
B.Windows 98 or later installed on the workstation.
C.eDirectory 8.7.3 or later installed on the server.
D.Windows 2000 or later installed on the workstation.
E.A Read/Write replica of the tree's root partition on the server.
Answer: DE
Novell 050-701 exam prep 050-701 exam dumps 050-701 answers real questions
NO.3 While upgrading a NetWare 6 server to OES NetWare, the following error message has been
displayed
on the server:
"Error Binding IP to AMD_PCI1. Make sure this card's IP address is not already in use."
The server has hung and you can't complete the upgrade. What caused this to happen?
A.An incorrect board name has been assigned to the network interface.
B.The wrong .LAN driver has been loaded for the server's network board.
C.The same IP address is being assigned twice to the same network board.
D.The latest support pack has not been installed on the NetWare 6 server.
E.Your server's startup files were stored in a directory named something other than "C:\Nwserver".
Answer: E
Novell answers real questions 050-701 050-701 original questions 050-701 exam prep 050-701 test
NO.4 After upgrading a NetWare 5.1 server to OES NetWare, you can't mount volume DATA. Given that
DATA is an NSS volume, which command will fix the problem?
A.LOAD NW51.NSS
B.LOAD ZLSS.NSS
C.VCU DATA DATA2
D.VOLMN DATA DATA2
E.NSS /NW51VOLUMEUPGRADE=ON
F.NSS /ZLSSVOLUMEUPGRADE=ALL
G.NSS /NW51VOLUMEUPGRADE=ALL
Answer: F
Novell pdf 050-701 exam 050-701 050-701 050-701 certification training
NO.5 Which commands are used to start and stop the Public Instance of Tomcat on an OES NetWare server?
(Choose 2.)
A.tcstop.ncf
B.tomcat4.ncf
C.tc4stop.ncf
D.tcstart.ncf
E.tc4start.ncf
F.tomcat4stop.ncf
Answer: BC
Novell answers real questions 050-701 certification training 050-701 original questions 050-701 test
NO.6 What does the View and Update NDS option in Deployment Manager do?
A.Upgrades existing versions of NDS in the tree to eDirectory.
B.Copies a new version of DS.NLM and SGUID.NLM to NetWare 4 servers in the tree.
C.Places a Read/Write replica of the root partition on all existing servers in the tree.
D.Patches existing servers in the tree to a revision level compatible with the version of eDirectory used by
OES NetWare.
E.Locates servers that are running incompatible versions of Directory Services and removes them from
the tree.
Answer: D
Novell demo 050-701 pdf 050-701 study guide
NO.7 What is the value of the last byte of a computer's NetBIOS name if the system functions as a
workstation?
A.00
B.20
C.1C
D.Null
Answer: A
Novell exam simulations 050-701 exam simulations 050-701 answers real questions 050-701 test answers
NO.8 As a part of the In-Place Upgrade process; what command is used to mount the OES NetWare
Operating System CD as a volume on a NetWare 6.0 server?
A.CD MOUNT ALL
B.LOAD CDROM.NSS
C.LOAD CD9660.NSS
D.LOAD CD9660.NLM
E.LOAD ISO9660.NSS
F.LOAD ISO9660.NLM
G.MOUNT -T ISO9660
Answer: C
Novell 050-701 050-701 study guide 050-701 test answers
NO.9 What steps do you need to take to prepare a Windows 2000 or XP Professional workstation to run the
Migration Wizard? (Choose 2.)
A.Disable burst mode in the Novell Client.
B.Disable file caching in the Novell Client.
C.Verify that Microsoft SQL Server is installed.
D.Install Microsoft Data Access Components 2.8 or later.
E.Disable the Auto Reconnect parameter in the Novell Client.
F.Verify that Microsoft .NET Framework Version 1.1 is installed.
Answer: BD
Novell 050-701 050-701 050-701 exam
NO.10 How do you perform a Down-Server Upgrade?
A.Use iManager 2.0 or later to complete the upgrade from a workstation.
B.Use NetWare Deployment Manager to complete the upgrade from a workstation.
C.Mount the OES NetWare Operating System CD; then select Novell > Install to begin the upgrade.
D.Boot the server from the OES NetWare Operating System CD and manually execute INSTALL.BAT with
the /UPGRADE switch.
Answer: D
Novell pdf 050-701 certification training 050-701 050-701 practice test 050-701 050-701 exam simulations
NO.11 Which OES NetWare component automates the download and installation of NetWare updates?
A.VIM Support
B.bash Support
C.NXBit Support
D.ZENworks Red Carpet Daemon
E.Common Information Model Support
Answer: D
Novell 050-701 practice test 050-701 demo 050-701 exam dumps
NO.12 A.UNLOAD BLNK
B.DSTRACE -BLNK
C.DSTRACE BLNK OFF
D.DSTRACE BLNK STOP
E.DSTRACE BLNK OFF STAY RESIDENT
Answer: B
Novell braindump 050-701 050-701 demo 050-701
NO.13 When performing a Default Installation of OES NetWare, which parameters are configured
automatically by the installation program? (Choose 2.)
A.Codepage 437
B.VGA video mode
C.4 GB SYS volume
D.4 GB DATA volume
E.Basic NetWare File Server patterned deployment
Answer: AC
Novell 050-701 050-701 braindump 050-701
NO.14 Your organization has three eDirectory trees; one for each functional group in your organization. One
tree runs on NetWare 5.1 servers; the others run on NetWare 6.0 servers. You've just installed a high-end
OES NetWare server and want to consolidate all the servers in the disparate trees to the new server using
the Novell NetWare Server Consolidation Utility. Can this be done?
A.Yes, the network meets the prerequisite requirements.
B.No, the Server Consolidation Utility can't consolidate servers residing in different trees.
C.No, NetWare 6.0 servers can't be consolidated to an OES NetWare server using the Server
Consolidation Utility.
D.No, NetWare 5.1 servers can't be consolidated to an OES NetWare server using the Server
Consolidation Utility.
E.No, you can't consolidate servers of mixed versions to an OES NetWare server using the Server
Consolidation Utility.
Answer: A
Novell exam prep 050-701 exam dumps 050-701 certification
NO.15 While upgrading a NetWare 5.1 server to OES NetWare, you see "Unable to Copy File" error messages
on the screen. After the upgrade is complete, you can't boot the operating system. Which are the most
probable causes of this problem? (Choose 2.)
A.Files in the C:\Nwserver directory were flagged Read-Only.
B.An obsolete support pack was installed on the NetWare 5.1 server.
C.The .HAM storage driver was out of date on the NetWare 5.1 server.
D.The server's BIOS needs to be updated to the latest firmware version.
E.The .CDM hard disk device driver was out of date on the NetWare 5.1 server.
Answer: AD
Novell demo 050-701 practice test 050-701 050-701 exam 050-701 questions
NO.16 How do you perform an In-Place Upgrade?
A.Use iManager 2.0 or later to complete the upgrade from a workstation.
B.Use NetWare Deployment Manager to complete the upgrade from a workstation.
C.Mount the OES NetWare Operating System CD; then select Novell > Install to begin the upgrade.
D.Boot the server from the OES NetWare Operating System CD and manually execute INSTALL.BAT with
the /UPGRADE switch.
Answer: C
Novell certification 050-701 certification training 050-701 pdf 050-701
NO.17 You want to upgrade a NetWare 6 server with Support Pack 1 to OES NetWare. The server hardware
uses dual Pentium II 400 MHz CPUs, 512 MB RAM, an 8 GB hard disk drive with a 200 MB DOS partition,
and a USB mouse. Can this server be upgraded?
A.Yes, the server meets all prerequisite requirements.
B.No, OES NetWare requires PIII 750 MHz CPUs or later.
C.No, the server's CPU is too slow and the hard disk drive is too small.
D.No, the server's DOS partition is too small and USB mice aren't supported.
E.No, the server doesn't have enough RAM and must have Support Pack 3 or later applied.
F.No, the server's DOS partition is too small and must have Support Pack 5 or later applied.
Answer: F
Novell 050-701 050-701 050-701 050-701
NO.18 When attempting an In-Place Upgrade on a NetWare 5.1 server with Support Pack 5, the upgrade
process fails. Which is the cause?
A.NetWare 5.1 servers can't be upgraded; you must use the Migration Wizard.
B.You must apply Support Pack 8 or later to upgrade a NetWare 5.1 server to OES NetWare.
C.You can't use an In-Place Upgrade on a NetWare 5.1 Server; you must perform a Remote Upgrade.
D.You can't use an In-Place Upgrade on a NetWare 5.1 server; you must perform a Down-Server
Upgrade.
Answer: B
Novell 050-701 050-701 test answers 050-701
NO.19 Which OES NetWare component enables script-based management of the network?
A.NXBit Support
B.bash Shell Support
C.ZENworks Management Daemon
D.Common Information Model Support
Answer: B
Novell pdf 050-701 050-701 050-701 test answers 050-701 questions 050-701 original questions
NO.20 When you upgrade a NetWare 5.1 server to OES NetWare, what happens to the Enterprise Web
Server running on the NetWare 5.1 server?
A.It is reconfigured to use IP ports 81 and 444.
B.It is reconfigured to use a secondary IP address.
C.It is used to provide OES NetWare web services instead of Apache Web Server.
D.It is removed and its configuration parameters are migrated to the Apache Web Server's configuration
file.
Answer: D
Novell questions 050-701 050-701 exam simulations
NO.21 If a NetWare 4.2 server exists in the tree where you plan to install an OES NetWare server, what must
you do?
A.Implement Universal Password.
B.Remove the server from the tree.
C.Run Deployment Manager and select the Prepare for CIFS/AFP option.
D.Run Deployment Manager and select the Generate GUIDs on NetWare 4 Servers option.
E.Run Deployment Manager and select the Update Certificate Authority Objects option.
Answer: D
Novell original questions 050-701 050-701 050-701
NO.22 Given that your workstation's CD drive is assigned drive letter D, which is the correct file name and
location for the NetWare Deployment Manager executable?
A.D:\NWDEPLOY.EXE
B.D:\OESNWDEPLOY.EXE
C.D:\TOOLS\NWDEPLOY.EXE
D.D:\INSTALL\NWDEPLOY.EXE
E.D:\PRODUCTS\NWDEPLOY.EXE
Answer: A
Novell 050-701 050-701
NO.23 While migrating a NetWare 5.1 server to OES NetWare using a Windows 2000 Professional
workstation with Service Pack 2 and Novell Client 4.83 installed, the migration fails. What is the cause of
the problem?
A.Windows 2000 Professional isn't compatible with the Migration Wizard.
B.NMAS must be disabled on the Novell Client 4.83 to work with the Migration Wizard.
C.The Migration Wizard requires the Novell Client 4.91 or later be installed on the workstation.
D.The Migration Wizard requires NICI 2.0.2 be installed on a Windows 2000 Professional workstation.
E.The Migration Wizard requires Service Pack 4 or later be installed on a Windows 2000 Professional
workstation.
Answer: C
Novell exam dumps 050-701 dumps 050-701
NO.24 Which operating system uses a version of NDS or eDirectory that is incompatible with OES NetWare?
A.NetWare 3.2
B.NetWare 4.1
C.NetWare 4.2
D.NetWare 5.0
E.NetWare 5.1
F.NetWare 6.0
Answer: B
Novell exam simulations 050-701 braindump 050-701 study guide
NO.25 Given that your workstation's CD drive is assigned drive letter D, what is the Migration Wizard 8.1
location and filename?
A.D:\MIGRTWZD.EXE
B.D:\MIGRTWZD81.EXE
C.D:\PRODUCTS\SCMT.EXE
D.D:\INSTALL\MIGRTWZD81.EXE
E.D:\PRODUCTS\MGRTWZD\SCMT.EXE
F.D:\PRODUCTS\MIGRATION_UTILITIES\SCMT.EXE
Answer: F
Novell 050-701 study guide 050-701
NO.26 You are migrating a NetWare 5.1 server to OES NetWare. The source server name is DA36 and is
located in FINANCE.SLC.DA in the DA-TREE. You install the pre-migration OES NetWare server as
DA36 located in .DA in the TEMP-TREE. Why will the migration fail?
A.The source tree name must be the same as the destination tree name.
B.The source server name can't be the same as the destination server name.
C.The source server context must be the same as the destination server context.
D.You must first upgrade the NetWare 5.1 server to NetWare 6.0; then migrate it to OES NetWare.
E.The source tree name and the server context must be the same as the destination tree name and
server context.
Answer: B
Novell 050-701 exam dumps 050-701 exam dumps 050-701 exam simulations 050-701 pdf
NO.27 After upgrading a NetWare 6.5 server to OES NetWare, the iPrint service on the server can no longer
distribute its iPrint printers to network clients. Which file should you locate and rename to "IPP.conf" to fix
this problem?
A.IPP.$$$
B.IPP.conf.new
C.IPP.conf.old
D.IPP.conf.OES
Answer: A
Novell pdf 050-701 certification training 050-701 original questions 050-701 050-701
NO.28 Which utility is used to verify that each server has the cryptographic keys necessary to securely
communicate with the other servers in the tree?
A.SECURE.NLM
B.CONFIG.NLM
C.SDIDIAG.NLM
D.MONITOR.NLM
E.PKICHECK.NLM
F.SDINOTES.NLM
G.SECUREDIAG.NLM
Answer: C
Novell demo 050-701 exam 050-701 demo 050-701 test 050-701
NO.29 Which OES NetWare service allows users to find and restore deleted files without help desk support?
A.iSCSI
B.iFolder
C.Virtual Office
D.Identity Manager
E.Archive and Versioning
F.Novell File Access Protocols
Answer: E
Novell 050-701 certification 050-701 braindump
NO.30 If a NetWare 4.1 server exists in the tree where you plan to install an OES NetWare server, what must
you do?
A.Remove the server from the tree.
B.Use the View and Update NDS option in Deployment Manager.
C.Use the Extend the Core Schema option in Deployment Manager.
D.Use the Prepare for New eDirectory option in Deployment Manager.
E.Use the Generate GUIDs on NetWare 4 Servers option in Deployment Manager.
Answer: A
Novell 050-701 050-701 050-701 test answers 050-701
ITCertMaster offer the latest C4040-122 Practice Test and high-quality 700-505 PDF Exam Questions training material. Our E20-385 VCE testing engine and 00M-654 dumps can help you pass the real exam. High-quality CUR-051 Exam Questions & Answers can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertmaster.com/050-701.html
没有评论:
发表评论