Free download Juniper certification JN0-360 exam questions and answers

ITCertMaster Juniper JN0-360 practice exam is the most thorough, most accurate and latest practice test. You will find that it is the only materials which can make you have confidence to overcome difficulties in the first. Juniper JN0-360 exam certification are recognized in any country in the world and all countries will be treate it equally. Juniper JN0-360 certification not only helps to improve your knowledge and skills, but also helps your career have more possibility.

ITCertMaster's training product for Juniper certification JN0-360 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITCertMaster's training about Juniper certification JN0-360 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.

ITCertMaster's providing training material is very close to the content of the formal examination. Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. We promise that we will do our best to help you pass the Juniper certification JN0-360 exam.

In order to allow you to safely choose ITCertMaster, part of the best Juniper certification JN0-360 exam materials provided online, you can try to free download to determine our reliability. We can not only help you pass the exam once for all, but also can help you save a lot of valuable time and effort. ITCertMaster can provide you with the real Juniper certification JN0-360 exam practice questions and answers to ensure you 100% pass the exam. When having passed Juniper certification JN0-360 exam your status in the IT area will be greatly improved and your prospect will be good.

Exam Code: JN0-360
Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Guaranteed success with practice guides, No help, Full refund!
252 Questions and Answers
Updated: 2013-09-26

ITCertMaster's Juniper JN0-360 exam training materials is virtually risk-free for you at the time of purchase. Before you buy, you can enter ITCertMaster website to download the free part of the exam questions and answers as a trial. So you can see the quality of the exam materials and we ITCertMasteris friendly web interface. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you. We absolutely protect the interests of consumers. Training materials provided by ITCertMaster are very practical, and they are absolutely right for you. We can make you have a financial windfall.

JN0-360 Free Demo Download: http://www.itcertmaster.com/JN0-360.html

NO.1 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

Juniper exam simulations   JN0-360   JN0-360   JN0-360 exam simulations

NO.2 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper   JN0-360   JN0-360 answers real questions   JN0-360

NO.3 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper questions   JN0-360   JN0-360   JN0-360 practice test

NO.4 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

Juniper certification training   JN0-360   JN0-360 test

NO.5 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper exam simulations   JN0-360 exam prep   JN0-360   JN0-360 braindump

NO.6 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper   JN0-360 questions   JN0-360 braindump   JN0-360   JN0-360   JN0-360 pdf

NO.7 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

Juniper questions   JN0-360 test questions   JN0-360 test answers   JN0-360

NO.8 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

Juniper test   JN0-360   JN0-360 original questions

NO.9 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper   JN0-360 exam prep   JN0-360 practice test   JN0-360   JN0-360

NO.10 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper   JN0-360 dumps   JN0-360   JN0-360 answers real questions

NO.11 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

Juniper   JN0-360   JN0-360   JN0-360   JN0-360

NO.12 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper test   JN0-360   JN0-360   JN0-360

NO.13 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper   JN0-360 certification training   JN0-360 exam prep   JN0-360 test questions   JN0-360 practice test

NO.14 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

Juniper   JN0-360 original questions   JN0-360 test questions   JN0-360 test

NO.15 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

Juniper certification training   JN0-360   JN0-360 practice test   JN0-360   JN0-360

NO.16 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper test answers   JN0-360 exam simulations   JN0-360   JN0-360 test

NO.17 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper practice test   JN0-360 study guide   JN0-360 exam

NO.18 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper   JN0-360   JN0-360 test   JN0-360 exam simulations

NO.19 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

Juniper   JN0-360   JN0-360 demo   JN0-360

NO.20 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360   JN0-360   JN0-360 test   JN0-360 questions

ITCertMaster offer the latest 1Z0-807 Practice Test and high-quality JN0-360 PDF Exam Questions training material. Our 70-488 VCE testing engine and 1Z0-511 dumps can help you pass the real exam. High-quality 000-N45 Exam Questions & Answers can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertmaster.com/JN0-360.html